# Improve object stabilization with anchoring or differently **URL:** \ **Category:** Technical Support\ **Tags:** studio\ **Created:** [August 5, 2025, 7:15am UTC](https://forum.8thwall.com/t/improve-object-stabilization-with-anchoring-or-differently/7936 "2025-08-05T07:15:23Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Antonio\_Furioso](https://avatars.discourse-cdn.com/v4/letter/a/e19b73/32.png) [@Antonio\_Furioso](https://forum.8thwall.com/u/Antonio_Furioso)\ **Post date:** [August 5, 2025, 7:15am UTC](https://forum.8thwall.com/t/improve-object-stabilization-with-anchoring-or-differently/7936/1 "2025-08-05T07:15:23Z")
Guys, why after spawning the object, when the camera is moved a little, is the object then repositioned? I want to do a kind of virtual tour, and when I go inside the “object” and I turn around, the object is being repositioned. I do not want this behavior. I want the object to stay where I positioned it. (Second number 15) > **[Screen\_Recording\_20250802\_153258\_Chrome.mp4](https://drive.google.com/file/d/19aSFEHsEzn8lskz4853OINjf4T11ArRd/view?usp=sharing)** > > Google Drive file. I’m using studio. ---
**Author:** ![GeorgeButler](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.8thwall.com/georgebutler/32/1903_2.png) [@GeorgeButler](https://forum.8thwall.com/u/GeorgeButler)\ **Post date:** [August 5, 2025, 9:19pm UTC](https://forum.8thwall.com/t/improve-object-stabilization-with-anchoring-or-differently/7936/2 "2025-08-05T21:19:00Z")
Hi, welcome to the forum! It looks like the SLAM tracking is losing sight of the ground and then attempting to re-position it back where it was. It’s hard to tell from the video since most of it is obscured by the model but I have a hunch that you’re tilting the camera up too much causing the Computer Vision algorithm to lose tracking of the floor. ---
**Author:** ![Antonio\_Furioso](https://avatars.discourse-cdn.com/v4/letter/a/e19b73/32.png) [@Antonio\_Furioso](https://forum.8thwall.com/u/Antonio_Furioso)\ **Post date:** [August 6, 2025, 7:26am UTC](https://forum.8thwall.com/t/improve-object-stabilization-with-anchoring-or-differently/7936/3 "2025-08-06T07:26:55Z")
The camera position was at 3/4. When it was 0 instead, it wasn’t tracking well. So I don’t know why it is doing that. I can try Y 2 but I don’t think it would change that much. Any solution? How can I share the code privately in the case? ---
**Author:** ![GeorgeButler](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.8thwall.com/georgebutler/32/1903_2.png) [@GeorgeButler](https://forum.8thwall.com/u/GeorgeButler)\ **Post date:** [August 6, 2025, 3:49pm UTC](https://forum.8thwall.com/t/improve-object-stabilization-with-anchoring-or-differently/7936/4 "2025-08-06T15:49:42Z")
Sure! Land your changes and [share the project](https://www.8thwall.com/docs/account/projects/project-sharing/#share-project-with-another-workspace) with the `support` workspace and I’ll take a look. ---
**Author:** ![Antonio\_Furioso](https://avatars.discourse-cdn.com/v4/letter/a/e19b73/32.png) [@Antonio\_Furioso](https://forum.8thwall.com/u/Antonio_Furioso)\ **Post date:** [August 7, 2025, 7:11am UTC](https://forum.8thwall.com/t/improve-object-stabilization-with-anchoring-or-differently/7936/5 "2025-08-07T07:11:23Z")
Thank you. I just shared. Please take a look and let me know. The file for instantiating is gridItem.ts ---
**Author:** ![GeorgeButler](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.8thwall.com/georgebutler/32/1903_2.png) [@GeorgeButler](https://forum.8thwall.com/u/GeorgeButler)\ **Post date:** [August 7, 2025, 9:09pm UTC](https://forum.8thwall.com/t/improve-object-stabilization-with-anchoring-or-differently/7936/6 "2025-08-07T21:09:43Z")
The tracking is looking pretty good to me. Keep in mind that the area I’m testing in is very visually rich with a lot of feature points for the World Tracking to hook onto. I also got good results in the Simulator as well. Additionally, because 8th Wall experiences are responsive by default you will see a different scale depending on the initial Camera height, however that typically doesn’t affect tracking quality. ---
**Author:** ![Antonio\_Furioso](https://avatars.discourse-cdn.com/v4/letter/a/e19b73/32.png) [@Antonio\_Furioso](https://forum.8thwall.com/u/Antonio_Furioso)\ **Post date:** [August 11, 2025, 7:34am UTC](https://forum.8thwall.com/t/improve-object-stabilization-with-anchoring-or-differently/7936/7 "2025-08-11T07:34:19Z")
Yes, I may have been testing in an area with fewer feature points. But also when I try in an area with more feature points, sometimes it move the objects in another direction. I can’t understand why this happened. You can see in the 36’. > **[AR template furniture.mp4](https://drive.google.com/file/d/1sYK1RboxKCEdTUkBoHFD-8A1iGFeSdKp/view?usp=sharing)** > > Google Drive file. ---
**Author:** ![GeorgeButler](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.8thwall.com/georgebutler/32/1903_2.png) [@GeorgeButler](https://forum.8thwall.com/u/GeorgeButler)\ **Post date:** [August 12, 2025, 5:48pm UTC](https://forum.8thwall.com/t/improve-object-stabilization-with-anchoring-or-differently/7936/8 "2025-08-12T17:48:25Z")
In your video the floor is being tracked as the ground of the AR scene. The issue is that the real floor consists of repetitive wooden planks which all look similar to the engine when it is calculating the content’s location. This makes it harder for the system to maintain accurate tracking. If you test in an area with more unique visual features such as outside on concrete with cracks and distinct markings I would expect the tracking to perform much better. In the video I shared you can see that the floor is full of identifiable marks which helps the system lock on more reliably.