# Using Full Size VPS Mesh of a Wayspot

**URL:** <https://forum.8thwall.com/t/using-full-size-vps-mesh-of-a-wayspot/2756>\
**Category:** Technical Support\
**Tags:** cloud-editor, vps, a-frame\
**Created:** [September 13, 2024, 5:33am UTC](https://forum.8thwall.com/t/using-full-size-vps-mesh-of-a-wayspot/2756 "2024-09-13T05:33:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![FXM\_Developer](https://avatars.discourse-cdn.com/v4/letter/f/f6c823/32.png) [@FXM\_Developer](https://forum.8thwall.com/u/FXM_Developer)\
**Post date:** [September 13, 2024, 5:33am UTC](https://forum.8thwall.com/t/using-full-size-vps-mesh-of-a-wayspot/2756/1 "2024-09-13T05:33:36Z")

</div>

I’ve notice that in Niantic Lightship geospatial browser, you can download the full size VPS mesh of the wayspot. But in 8th Wall, it seems that the VPS mesh is divided into smaller Mesh. Is there any alternative way to use the full mesh in 8th wall? I’m trying to get the full mesh because I want to transfer the experience from ARDK to 8th wall.

 ![image](https://us1.discourse-cdn.com/flex019/uploads/x8thwall/original/1X/494d2c843d59838f6774b22408e4dfcc9d9ec7b9.jpeg)

---

<div class="post-metadata">

**Author:** ![Evan](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.8thwall.com/evan/32/431_2.png) [@Evan](https://forum.8thwall.com/u/Evan)\
**Post date:** [September 13, 2024, 9:20pm UTC](https://forum.8thwall.com/t/using-full-size-vps-mesh-of-a-wayspot/2756/2 "2024-09-13T21:20:39Z")

</div>

In 8th Wall VPS development, you must place content relative to the _Selected Mesh_ in the Geospatial Browser (GSB). You can align the full mesh with the selected mesh in 3D modeling software or using the A-Frame inspector if you’d like. Once you’ve aligned the full mesh with the selected mesh, you can just use the translated full mesh in your experience instead of the selected mesh downloaded from the GSB.

Keep in mind that this full mesh is probably much larger in size than the selected mesh and may negatively impact the performance of your experience. You might consider using the full mesh to place content initially, but not actually using it in your experience unless you _truly_ need it for occlusion - in which case you should certainly [optimize the mesh](https://www.8thwall.com/docs/guides/your-3d-models-on-the-web/#glb-optimization) as much as possible.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex019/uploads/x8thwall/original/2X/9/9212a857458f1b03a6accb129e0f8cbea408e3e5.png) [@system](https://forum.8thwall.com/u/system)\
**Post date:** [December 5, 2024, 3:23am UTC](https://forum.8thwall.com/t/using-full-size-vps-mesh-of-a-wayspot/2756/3 "2024-12-05T03:23:23Z")

</div>

This topic was automatically closed 4 days after the last reply. New replies are no longer allowed.